飞船再入舱三维化学非平衡流数值模拟

对飞船再入舱高超声速化学非平衡三维流场进行数值模拟。控制方程为含化学反应源项的全Ｎａｖｉｅｒ－ Ｓｔｏｋｅｓ 方程组, 化学模型为高温空气的七组元模型, 其组元成分为Ｎ２ 、Ｏ２、ＮＯ、Ｎ、Ｏ、ＮＯ＋ 、ｅ－ 。差分格式采用张涵信院士提出的ＮＮＤ激波捕捉格式并用全耦合方法处理流动方程及化学反应方程, 对化学反应源项采用全隐式处理, 运用时间预处理技术以加快收敛。同时, 也对完全气体模型进行计算, 以分析真实气体效应。与实验数据对比, 说明本文结果是可信的。     

高轨双星辐射源跟踪的高斯和-容积Kalman滤波算法

针对辐射源运动方程和观测方程的强非线性,提出基于高斯和框架与5阶容积Kalman滤波(5CKF)的跟踪算法GS-5CKF。该方法将起始时刻的时差观测量所确定的位于地球表面的时差线按经度等间隔划分,初始化多个并行的5CKF,线性组合各滤波器的输出获得辐射源运动状态的估计。针对5CKF,提出新的非线性测度并引入滤波器分裂与合并,从而提高了跟踪精度,同时保持GS-5CKF算法复杂度基本不变。仿真表明,相对仅使用单个5CKF和基于高斯和框架但使用3阶容积Kalman滤波器的GS-3CKF等方法,提出的算法具有更高的估计精度。     

面向GPU的非结构网格有限体积计算流体力学的图染色方法优化

采用图染色方法解决通量累加和局部最大压力计算引起的两种典型资源竞争问题,并通过共享内存的使用、体编号和面编号的重排、面数据的重排三种策略优化图染色方法。针对应用在空气动力学多种规模的三维网格,分别采用双精度和单精度操作数,在Nvidia Tesla V100和K80 GPU上,展开性能测试。结果表明:共享内存的优化效果不明显;体编号和面编号重排降低了图染色方法的计算性能;面数据重排可以有效地优化图染色方法;计算性能在V100上提高20%左右,在K80上提高15%左右。     

Managing components for assemble‐to‐order products with lead‐time‐dependent pricing: The full‐shipment model

We study a component inventory planning problem in an assemble‐to‐order environment faced by many contract manufacturers in which both quick delivery and efficient management of component inventory are crucial for the manufacturers to achieve profitability in a highly competitive market. Extending a recent study in a similar problem setting by the same authors, we analyze an optimization model for determining the optimal component stocking decision for a contract manufacturer facing an uncertain future demand, where product price depends on the delivery times. In contrast to our earlier work, this paper considers the situation where the contract manufacturer needs to deliver the full order quantity in one single shipment. This delivery requirement is appropriate for many industries, such as the garment and toy industries, where the economies of scale in transportation is essential. We develop efficient solution procedures for solving this optimization problem. We use our model results to illustrate how the different model parameters affect the optimal solution. We also compare the results under this full‐shipment model with those from our earlier work that allows for multiple partial shipments. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Constrained minimax optimization of continuous search efforts for the detection of a stationary target

Analytical resolution of search theory problems, as formalized by B.O. Koopman, may be applied with some model extension to various resource management issues. However, a fundamental prerequisite is the knowledge of the prior target density. Though this assumption has the definite advantage of simplicity, its drawback is clearly that target reactivity is not taken into account. As a preliminary step towards reactive target study stands the problem of resource planning under a min–max game context. This paper is related to Nakai's work about the game planning of resources for the detection of a stationary target. However, this initial problem is extended by adding new and more general constraints, allowing a more realistic modeling of the target and searcher behaviors. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

系统延迟对脱靶量的影响研究

Paul Zarchan在研究一类由二项式传递函数描述的制导律的脱靶量时,提出了一个命题,即这一类制导律的脱靶量随制导时间的变化曲线可由时间常数为1时的那条脱靶量曲线经过时间轴的比例变换得到。证明了这一命题,并将它扩展到系统中存在纯延迟的情况,得到的结果可以很方便地用于研究系统延迟对脱靶量的影响。     

面向对象方法的一类飞行器模拟器设计与实现

对一类C4I飞行器模拟器的设计与实现进行了研究.该模拟器是分布式C4I仿真系统中的兵力生成子系统,起着演示指控效果、检验决策质量的重要作用.从系统需求出发,采用面向对象的方法对它进行了分析与设计,并最终实现了飞行器模拟器软件系统.该系统已成功应用于某防空C4I仿真试验床中,C4I联机试验表明,飞行器模拟器能较好地模拟指控命令响应并提供较高精度的飞行导航模拟数据.此外,面向对象方法的采用,不仅使系统功能得到了加强,也大大缩短了系统的开发周期.     

火箭助飞鱼雷对随机机动目标的射击效率仿真

为解决火箭助飞鱼雷的作战使用问题,需要确定它对随机机动目标的射击效率,通过对该雷空中及水下弹道的各阶段深入细致的分析研究,建立了火箭助飞鱼雷射击效率仿真模型.着重探讨了采用目标现在点射击方法,对随机机动目标的发现概率仿真计算模型,进行了实际仿真计算,并就一些主要参数对射击效率的影响做了较为深入的分析.仿真结果表明,所建立的射击效率模型符合火箭助飞鱼雷的实际,对进一步深入研究其作战使用诸多问题具有一定的参考价值.     

冷兵器时代战争对经济发展的影响——以唐、五代时期华北平原为考察中心

安史之乱爆发,使华北陷入战争的泥潭,特别是安史之乱后期,中央和安史叛军主要在华北一带争夺,这里的经济发展受到了严重的破坏,"人烟断绝,千里萧条".有些学者认为安史乱后,华北经济从此便衰落下去,也有些学者不赞成此说.那么,华北平原是否由于安史战乱而一蹶不振呢?